Quality Soldering Irons for all purposes

     

Soldering Irons

To do good work in ANY modelling area, high quality tools are essential - and without doubt soldering is one place where owning and using the right tool will make the difference between success and failure!

The Soldering iron specification is important of course, but as well as the right tip and consistent heat delivery, the fit and feel of the Iron in your hand are very important too… because just as you write best with a well made and balanced pen, a high quality Iron will feel good in your hand and as a result, it will give the greatest comfort and quality in its results!

So… if you are serious about doing a good job of kit-building, wiring the layout, DCC installation or anything else - then make sure that you maximize the chances of success, and keep soldering a pleasure by choosing the right Soldering Iron, solder, flux & related tools!

We guarantee that if you do, it will make an absolutely huge difference to every task you do at the workbench, whether it is assembling brass or whitemetal kits, soldering wire to rail, soldering decoder wires, adding wires to PCB’s or installing LEDs…

(Bear in mind that for decoder, LED and anything with electronics, you should choose an ESD safe (“static free”) iron and always use a quick precise touch of the Iron to avoid heat damage.)

Most importantly, it will be an easier and more enjoyable task with these products - we absolutely guarantee it as we will ONLY sell soldering equipment we will use ourselves!

Of course, once you have the correct Iron, you will still need the right solder and flux...To see our full range, click here.

(Just in case you missed it, we also have a massive section on how to solder, covering the “how to” of soldering almost anything! This really does give a step by step soldering guide , so  Click here if you wish to read it now)

 

————————————————————————————————————————--—-

 

HAKKO Soldering Irons:

We say often in this website that we will only ever sell things we truly believe in and will use ourselves, and nowhere is this more important than in soldering tools and accessories… They have to be the best!

A good soldering iron is like a fine pen - light and a delight to hold, it delivers heat quickly and exactly where needed and it maintains it as long as needed for bigger jobs.

We have decided to focus on high quality Japanese made Hakko soldering irons as they are the pre-eminent manufacturer, used on production lines world wide ...and they have gained this position by better quality, consistency, reliability and exceptional performance.

Once you get used to using a top quality soldering Iron, you will never want to part with it or change, so most importantly we carry not only the excellent Hakko product, but also stock a range of tips in popular modelling shapes and sizes, spare Irons, elements and just about any part you may ever require to keep your Iron working happily for as long as you are modelling!

We know how frustrating it is to need a new tip too—so ALL Hakko Irons are supplied with TWO—a fine electronics tip for decoder and electronics work, and a delicate but versatile small chisel type for larger joints such as wire to rail and brass kit assembly.

Finally—We really DO now use them ourselves, so can absolutely guarantee that no matter what you use it for, it will be the perfect soldering tool!

ALL Hakko soldering irons we stock are also ESD safe.

——————————————————————————————————

 

Hakko Mach-1 model 921 lightweight 55w 240v Soldering Iron

Text Box: This is a highly efficient lightweight 55watt soldering Iron that is a delight to hold. It has very quick initial heating (You can start soldering in as little as ten seconds!) and it has a very fast recovery, long-life ceramic heater and the tip structure totally surrounds the element for excellent heat transfer. The 921 has both the delicacy for fine work and the sheer power for tougher jobs, all in an Iron 200mm long and only just over 50 grams in weight! It is supplied with both a standard fine electronics tip AND a chisel tip for modelling work. An exceptionally nice Iron to use anywhere! The tip temperature is ideal for modellers at 370 degrees

Text Box: NOTE: We stock and guarantee availability of spare elements & spare tips for this Iron.

Text Box: HAK-921 Text Box: Hakko Mach 1/921 40w Iron with two tips Text Box: $89.95 ea

 

————————————————————————————————————————--—-

 

Hakko FX888 Professional quality 65w Soldering Station

Text Box: HAKKO Irons are now used in more high volume production and service facilities than any other, as their incredible reliability and exceptional user comfort make them the preferred Iron for the professionals. The FX-888 is the successor to our previous favourite, Hakko’s excellent and ultra reliable 936 soldering station but with a number of important refinements. These include a faster thermal recovery, a higher heater output (now 65W) and a new tip design which has a larger copper mass and improved thermal transfer, all things that make model making and general soldering easier.

NOTE: Only the Blue and Yellow version of FX888 is available in Australia

Text Box: 

Text Box: NOTE: We stock and guarantee availability of spare elements & spare tips for this Iron.

Text Box: HAK-888 Text Box: Hakko FX888 65watt Iron with two tips Text Box: $259.95 ea

Text Box: HAK-Tip Text Box: Standard Hakko Tips (Specify type please) Text Box: $12.95 ea

 

————————————————————————————————————————--—-

The Hakko FX950 analog High power 70watt Soldering Station

Text Box: The all new Hakko FX Series Irons are something very special… Huge power when needed yet the Iron is a delicate and extremely compact 30 grammes x 188mm long over the tip. Of course, the cord is pure silicone for superb flexibility. The FX950 is not usually supplied with a tip: However DCCconcepts add both a fine conical electronics tip and a chisel tip for heavier jobs in the pack when you buy it, making it not only one of the best Irons ever made… But also exceptional value. Text Box: Here are the key specifications for this exceptional Soldering Station.

Power Consumption

75W

Temperature Range

200-450°C (400-840°F )

Temperature Stability

±5°C (±9°F )

Power consumption

70W(24V)

Tip to Ground Resistance

<2Ω

Tip to Ground Potential

<2mV

Cord

1.2m

Total length (w/o cord):

188mm with 2.4D tip

Weight (w/o cord):

30g with 2.4D tip

Soldering Station

Output Voltage

24V

Dimensions

80(W)x118(H)x138(D)mm

Weight (w/o cord)

1.2kg

Model FX950

Packing List

Soldering Station(FX-950), Soldering Iron(FM-2028), Lock Key, Heat-Resistant Pad, Iron Holder (FH-101, with cleaning sponge). A fully Comprehensive Instruction Manual is included.
Text Box: NOTE: We stock and guarantee availability of spares, elements & tips for this Iron.

Buying the Hakko FX950 70 watt soldering Station (with BONUS- two tips)

Text Box: HAK-950 Text Box: Hakko FX950 70w Soldering station w/2 tips Text Box: $499.95 ea

Text Box: HAK-FXI Text Box: Spare Soldering Iron for FX Series Irons Text Box: $149.95 ea

Text Box: HAK-FXS Text Box: Stand for FX950 (not included with FX950) Text Box: $99.95 ea

Text Box: HAK-FXT Text Box: Standard FX Tip Series (The Tip also Includes the thermostat and integral heating element) Text Box: $34.95 ea

 

 ————————————————————————————————————————--—-

 

 

The Hakko FX951 Digital High power 70watt Soldering Station

 

Text Box: The all new Hakko FX Series Irons are something very special… Huge power when needed yet the Iron is a delicate and extremely compact 30 grammes x 188mm long over the tip. Of course, the cord is pure silicone for superb flexibility. The FX951 is not usually supplied with a tip: However DCCconcepts add both a fine conical electronics tip and a chisel tip for heavier jobs… all in the pack when you buy it, making it not only one of the best Irons ever made… But also exceptional value. Text Box: Here are the key specifications for this exceptional Soldering Station.

Power Consumption

75W

Temperature Range

200-450°C (400-840°F )

Temperature Stability

±5°C (±9°F )

Soldering iron (No. FM2028)

Power consumption

70W (24V)

Tip to Ground Resistance

< 2Ω

Tip to Ground Potential

< 2mV

Cord

1.2m

Total length (w/o cord):

188mm (when the Shape 2.4D soldering tip is attached)

Weight (w/o cord):

30g (when the Shape 2.4D soldering tip is attached)

 

Soldering Station

Output Voltage

24V

Dimensions

80(W)x130(H)x131(D)mm

Weight (w/o cord)

1.2kg

Model FX951

Packing List

Soldering Station (HAKKO FX-951), Soldering Iron (HAKKO FM-2028*), Card, Power Cord, Heat Resistant Pad, Iron Holder, Connecting cable, Instruction Manual (One of each unless specified)

Text Box: NOTE: We stock & guarantee availability of spares, elements & tips for this Iron.

 

Buying the Hakko FX951 70 watt soldering Station (with BONUS- two tips)

Text Box: HAK-951 Text Box: Hakko FX951 70w Soldering station w/2 tips Text Box: $569.95 ea

Text Box: HAK-FXI Text Box: Spare Soldering Iron for FX Series Irons Text Box: $149.95 ea

Text Box: HAK-FXT Text Box: Standard FX Tip Series (The Tip also Includes the thermostat and integral heating element) Text Box: $34.95 ea

 

————————————————————————————————————————--—-

 

Quick Links to other places…..

     HOME         PAGE TOP       NEXT PRODUCT PAGE

  No-Nonsense advice and the best in tools and equipment from modelling experts

Showrooms & Office:

 3/13 Lionel St. Naval Base

WA 6165 AUSTRALIA

Phone   +61 8 9437 2470

Fax        +61 8 9437 2471

sales@DCCconcepts.com

Time Zone GMT + 8hrs